If you're using a case, check whether it must be inserted before or after mounting inside the case. Insert the MicroSD Card into the Raspberry Pi.Use ctrl + O to save the file, hit return to confirm the name and use ctrl + X to exit the editor.Add the following code, changing the items denoted with angle brackets:Ĭtrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev.Open a new file named wpa_nf using the command nano wpa_nf.Create a file named ssh (no extension) touch ssh (MacOS might ask you for permission so that Terminal can access the volume).Ĭonfigure the WiFi (if you're using ethernet, you can skip this step):.Navigate to the MicroSD Card cd /Volumes/boot.Remove and reinsert the MicroSD Card, it should now be named boot.Ĭonfigure SSH (this will allow us to login to the Pi from the Terminal, you could complete the setup using a display and USB keyboard, but having SSH active is still recommended): Click on WRITE and wait until the process ends.Choose your SD Card (be careful if you have other volumes attached, as this process will erase everything in the selected drive).When choosing OS, select Use custom and look for the.Insert the MicroSD Card into your computer and burn the Raspbian image using the Raspberry Pi Imager:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |